Label printers XD4T For double-sided printing

It prints double-sided on textile materials, cardboard labels, pressed tubes, continuous or ready-for-use, as well as on continuous sythetic, paper or cardboard materials.

A drive roller enables the materials to be separated from the ribbon and furthermore improves the accuracy and precision in a print.
•    No adjustment of print head for different widths of material
•    Print rollers for narrow and slim materials
•    Operation and control are compatible with the A+ series.

For single-sided printing with centered material positioning and drawing roller please go to label printer A4+T.

Features:
Printable resolution dpi     300
Print width up to mm        105.6
Print speed up to mm/s     125

Accessories for label printer  XD4T
Cutter - Used to cut paper labels, self-adhesive labels, cardboard, textile or synthetic materials as well as heat shrink tubes.

Perforation cutter - Enables the perforation of the material for later manual separation.

Stacker with cutter - Printed materials are cut and stacked. The print job is stopped as soon as the maximum stack height is reached. Even stiff or curved materials may be processed. We recommend to have your material tested at our facilities.

Print rollers for small and thin materials
Outside the material width the printhead rubs against the print rollers. By using small print rollers feeding errors and wear on print head and print roller due to rubbing are avoided. Three different standard widths are available

Functions:

1 Wide graphic display - White backlight for optimum readability.

2 No print head adjustment - The print head is pressed down by two toggles. Due to centered material positioning there is no need to do print head adjustments and settings.

3 Material guide - High printing accuracy as the material positioning is located directly behind the print roller. Width adjustment with a single knob. The additional drive roller enables the material to be separated from the ribbon.

4 Separator - Preferred application with continuous and textile materials as well as pressed tubes. The transfer tape may stick with the textile tape after the printing. With a drive roller, the material is separated from the ribbon. In addition, the accuracy of impression is improved.

5 Peripheral connection - Add-on modules such as cutter, perforation cutter and stacker are easy to connect.

6 Solid metal chassis - Die-cast aluminum. All components are mounted on it.

7 Antistatic brush - Particularly in case of plastic materials electrostatics is discharged after printing.

8 Ribbon holder - Simple, centered insertion of the ribbon with three-part tightening axles. Imprinted rule simplifies ribbon positioning.

9 Roll holder - Available for core diameters starting 38 mm (76 mm adapters for improved label winding are provided). The material is automatically centered. The spring-mounted margin stop ensures constant tension during feeding, thus ensuring high printing accuracy.