Denso UR50 2-Port UHF RFID Reader reads RFID tags reliably to enable visualization of on-site status A fixed type scanner of UHF RF tags ideal for factory automation and logistics (250 mW / middle-distance type) - The Denso UR50 2-Port UHF RFID Reader reading capability meets the highest industry standard, and its robustness enables continuous operation even in harsh environments. These characteristics enable visualization of the on-site status, helping the customer to implement traceability.

Denso UR50 2-Port UHF RFID Reader reading ranges configured to match applications - The UR50 implements ultra-close reading of 5 mm–50 cm*2 and the UR40, another product in our lineup, implements long-distance reading of 8 meters. The reading range can be selected for each application. Combined with the polarization switching feature implemented using our original antenna technology, the optimal environment for customer operation can be assembled Safe, robust, environmentally resistant settings for uninterrupted execution of tasks

Antenna-integrated structure allows easy installation - The antenna-integrated structure enables easy installation in compact spaces. In addition, up to 2 external antennas can be added to secure a stable communication zone.

Denso UR50 2-Port Fixed-Mount UHF RFID Reader can be used even in factories or logistics warehouses due to its resistance to the environment. Its overwhelming robustness enables continuous stable operation 24 hours a day, 365 days a year.
・Safety standard: UL61010 acquired
・ Vibrations and impacts: IEC60068 compliant
・ Protection rating: IP65 supported
・Original heat dissipation design

Links flexibly with external devices - The UR50 can link with entry/exit detection sensors and beacons using its external I/O pins. In addition, it supports a variety of communication interfaces so that the optimal environment can be built for the required purpose.

Easier introduction
・Visually easy-to-understand configuration tool
・Control SDK provided to support development
・Easy installation with the VESA standard compliant specification

A fixed type scanner of UHF RF tags ideal for factory automation and logistics (250 mW / middle-distance type)
RF Tag
Communication Part     Output frequency - (for United States of America)  FCC:  915.25 MHz to 927.5 MHz, (at 250kHz intervals) (50 channels in total)
Compatible Standard     : ISO/IEC 18000-63 (GS1 EPC Gen2) compliant
Transmission Output     : 250 mW or below
Gain (polarization)  Integrated/Extended Antenna     

+3 dBi or below (linearly, circularly polarized wave) /
+2 dBi or below (circularly polarized)
3 m (linearly polarized), 2 m (circularly polarized) /
1 m (circularly polarized)
Maximum of 2 (URAN-50M1 supported)
Display Part     Display LED     4 LEDs（STATUS LED、NETWORK LED、RF LED、POWER LED）
External Input/Output     Input     4 pins (trigger, reset, forced halt)
Output     4 pins（OK、NG、BUSY、WARNING、ERROR）
Interface     RS-232C     115.2 Kbps maximum
USB           USB-COM interface
Standard     USB1.1compliant（12Mbps）
Connector     Micro-USB Type-B
Ethernet     Standard     IEEE802.3 100BASE-T compliant
Protocols     TCP, UDP, EtherNet/IP
ORiN     Supported
Input Power Supply (2)     Operating Power Supply
Voltage     24V DC + 10% -15%
Consumption     600mA Max
Environmental Conditions     Indoor or Outdoor Operation     Indoor use
Protection Rating     IP65(3)
Compatible Standard  Safety/
Vibrations and Impacts     UL61010/IEC60068
Operating Temperature Range     -20℃～50℃
Operating Humidity Range     10%-95% RH (no condensation or freezing)
External Dimensions (main body / external antenna): （W）×（D）×（H）(4)     121×121×55.4mm/70×70×30mm
Weight (main body / external antenna) (5)     
Approx. 640 g / Approx. 75 g