Keonn AdvanReader-60 UHF RFID Reader is a flexible UHF reader with an on-board microcomputer and a fully open Linux operating system. Thanks to its on-board microcomputer, the AdvanReader-60 can work stand-alone, without needing to be connected to an external computer, thereby reducing equipment costs, installation costs, and maintenance costs. The AdvanReader-60 includes several actuators and indicators on-board. Equipped with a small form factor (137 x 137 x 24
Keonn AdvanReader-60 UHF RFID Reader is a flexible UHF reader with an on-board microcomputer and a fully open Linux operating system. Thanks to its on-board microcomputer, the AdvanReader-60 can work stand-alone, without needing to be connected to an external computer, thereby reducing equipment costs, installation costs, and maintenance costs.
The AdvanReader-60 includes several actuators and indicators on-board. Equipped with a small form factor (137 x 137 x 24 mm), the AdvanReader-60 is an ideal solution for smart shelves, smart display fixture, smart surfaces, RFID portals, RFID tunnels, point of sales, and loss prevention systems applications.
The AdvanReader-60 is available in the following two models: 1-port 27 dBm power output and 2-port 30 dBm power output.
AdvanReader-60 features: On board computer with fully open Linux OS.
Small form factor.
2-digital/analog inputs, 5 digital outputs, and 1 relay output.
Acts as HID USB device.
Includes several sensors, actuators and indicators on-board.
Reduces time and cost of developing RFID systems.
Direct connection to an external loudspeaker .
High-performance: high output power and high sensitivity.
Communication interfaces: Ethernet, WiFi, USB HID.
Powered by PoE or on board battery for RTC chip
AdvanReader-60 benefits: High-performance: high output power and high sensitivity
Reduces time and cost of developing RFID systems
RFID Operating Region: FCC (917.4-927.2 MHz) - For use in North America
ETSI (865.6-867.6 MHz) - For use in the European Union
TRAI (865-867 MHz) - For use in India
KCC (917-923.5 MHz) - For use in Korea
MIC (916.8-920.8 MHz) - For use in Japan
ACMA (920-926 MHz) - For use in Australia
NZ (922-927.5 MHz) - For use in New Zealand
SRRC-MII (920.125-924.875 MHz) - For use in P.R. China
BRA (917.4-927.2 MHz) - For use in Brazil
CHL (917.4-927.2 MHz) - For use in Chile
PER (917.4-927.2 MHz) - For use in Peru
TWN (922-928 MHz) - For use in Taiwan
Specifications:Air Protocol Interface EPCglobal UHF Class 1 Gen 2 / ISO 18000-6C
Supported regions FCC (NA, SA) 902 MHz - 928 MHz / ETSI (EU, IN) 865.6 MHz - 867.6 MHz / MIC (KR) 910 MHz - 914 MHz / SRRC-MII (P.R.China) 920 MHz - 925 MHz / Brazil: 902-907,5 MHz and 915-928 MHz (by using channel selection) / ACMA (AU, NZ) 920 MHz – 926 MHz
RF connections One or two 50 ohm SMA connectors for monostatic antennas
RF Power Programmable from 0dBm to 27 dBm in 0.5 dBm steps (version with 1 port) // Programmable from 0dBm to 30 dBm in 0.5 dBm steps (version with 2 ports)
Max tag read distance Up to 9 m (33 feet) with 6dBi gain antennas
Max tag read throughput Up to 50 tags/second (version with 1 or 2 ports)
Data communications Power over Ethernet (PoE): IEEE 802.3af and 802.3at (Type 1 & Type 2)
Output power 5 V @ 200 mA (DC) non-isolated power supply to feed external devices and circuitry
On-board sensors and actuators Buzzer
On-board LED indicators LED on (white LED) // LED status (orange LED) // LED M6e Rx line (green LED) // LED M6e Tx line (red LED)
Inputs 2 x digital/analog inputs, 10 bits resolution Inputs accepted in the range: • 0 V - 3 V (Input 1) // • 0 V - 10 V (Input 2)
Power consumption Idle consumption < 3 W
Max consumption (@27 dBm) < 7 W (version with 1 port)
Max consumption (@30 dBm) < 9 W (version with 2 ports)
Temperature -20 °C to +50 °C
Size without enclosure 137 mm x 137 mm x 30 mm (5.39 inches x 5.39 inches x 0.95 inches)
Size with enclosure 143 mm x 143 mm x 30 mm (5.6 inches x 5.6 inches x 1.19 inches)
Weigh without enclosure 180 g (6.35 oz)
Weigh with enclosure 510 g (18.4 oz)
RFID Reader to Antenna Cables:
Keonn RFID Reader to Antenna RF Cables - SMA male straight - SMA male straight - 1.0foot (0,3Meter)
Keonn RFID Reader to Antenna RF Cables - SMA male straight - SMA male straight - 2.0feet (0,6Meter)
Keonn RFID Reader to Antenna RF Cables - SMA male straight - SMA male straight - 3.0feet (0,9Meter)
Keonn RFID Reader to Antenna RF Cables - SMA male straight - SMA male straight - 5.0feet (1,5Meter)
Keonn RFID Reader to Antenna RF Cables - SMA male straight - SMA male straight - 7.0feet (2,1Meter)
Keonn RFID Reader to Antenna RF Cables - SMA male straight - SMA male straight - 9.0feet (2,7Meter)
Keonn RFID Reader to Antenna RF Cables - SMA male straight - SMA male straight - 12.0feet (3,6Meter)
Keonn RFID Reader to Antenna RF Cables - SMA male straight - SMA male straight - 17.0feet (5,2Meter)
Keonn RFID Reader to Antenna RF Cables - SMA male straight - SMA male straight - 25.0feet (7,5Meter), LMR240
Keonn RFID Reader to Antenna RF Cables - SMA male straight - Rev TNC male straight - 1.0foot (0,3Meter)
Keonn RFID Reader to Antenna RF Cables - SMA male straight - Rev TNC male straight - 3.0feet (0,9Meter)
Keonn RFID Reader to Antenna RF Cables - SMA male straight - Rev TNC male straight - 5.0feet (1,5Meter)
Keonn RFID Reader to Antenna RF Cables - SMA male straight - Rev TNC male straight - 7.0feet (2,1Meter)
Keonn RFID Reader to Antenna RF Cables - SMA male straight - Rev TNC male straight - 9.0feet (2,7Meter)
Keonn RFID Reader to Antenna RF Cables - SMA male straight - Rev TNC male straight - 12.0feet (3,6Meter)
Keonn RFID Reader to Antenna RF Cables - SMA male straight - Rev TNC male straight - 17.0feet (5,2Meter)
Keonn RFID Reader to Antenna RF Cables - SMA male straight - Rev TNC male straight - 25.0feet (7,5Meter), LMR240
