Advantenna-L11 near-field RFID UHF Antenna is a compact size: 37mm x 137mm x 0.5mm equipped with a very thin form factor and a strong, even magnetic field distribution within its detection zone. When used with inductive near-field tags, the reading area can be confined to the vicinity of the antenna. This thin form factor and the wide coverage area in the near-field zone of the antenna makes it an ideal solution for many RFID applications such as points of sales,
Advantenna-L11 near-field RFID UHF Antenna is a compact size: 37mm x 137mm x 0.5mm equipped with a very thin form factor and a strong, even magnetic field distribution within its detection zone. When used with inductive near-field tags, the reading area can be confined to the vicinity of the antenna. This thin form factor and the wide coverage area in the near-field zone of the antenna makes it an ideal solution for many RFID applications such as points of sales, desktop applications, smart tables or other surfaces.
Applications:
Point of sales
Smart panels
Smart tables
Smart surfaces in general
Advantenna-L11 Features: Slim & compact near-field RFID UHF Antenna
Very thin form factor (13 mm with flange connector)
strong and even magnetic field distribution within its detection zone
dual band: ETSI and FCC
Benefits of Advantenna-L11: Readings confined to the vicinity of the antenna when used with near-field tags
Very thin form factor
Good performance
Cost effective
RFID Frequency Operating Regions: Dual Band (813-1000 MHz) - Broadband for different regions
Keonn Advantenna-L11 UHF RFID Antenna Connector Shapes: Flange Straight
Flange Right Angle
Keonn Advantenna-L11 UHF RFID Antenna Cables: RFID Reader to Antenna Cables:Keonn RFID Reader to Antenna RF Cables - SMA male straight - SMA male straight - 1.0foot (0,3Meter)
Keonn RFID Reader to Antenna RF Cables - SMA male straight - SMA male straight - 2.0feet (0,6Meter)
Keonn RFID Reader to Antenna RF Cables - SMA male straight - SMA male straight - 3.0feet (0,9Meter)
Keonn RFID Reader to Antenna RF Cables - SMA male straight - SMA male straight - 5.0feet (1,5Meter)
Keonn RFID Reader to Antenna RF Cables - SMA male straight - SMA male straight - 7.0feet (2,1Meter)
Keonn RFID Reader to Antenna RF Cables - SMA male straight - SMA male straight - 9.0feet (2,7Meter)
Keonn RFID Reader to Antenna RF Cables - SMA male straight - SMA male straight - 12.0feet (3,6Meter)
Keonn RFID Reader to Antenna RF Cables - SMA male straight - SMA male straight - 17.0feet (5,2Meter)
Keonn RFID Reader to Antenna RF Cables - SMA male straight - SMA male straight - 25.0feet (7,5Meter), LMR240
Keonn RFID Reader to Antenna RF Cables - SMA male straight - Rev TNC male straight - 1.0foot (0,3Meter)
Keonn RFID Reader to Antenna RF Cables - SMA male straight - Rev TNC male straight - 3.0feet (0,9Meter)
Keonn RFID Reader to Antenna RF Cables - SMA male straight - Rev TNC male straight - 5.0feet (1,5Meter)
Keonn RFID Reader to Antenna RF Cables - SMA male straight - Rev TNC male straight - 7.0feet (2,1Meter)
Keonn RFID Reader to Antenna RF Cables - SMA male straight - Rev TNC male straight - 9.0feet (2,7Meter)
Keonn RFID Reader to Antenna RF Cables - SMA male straight - Rev TNC male straight - 12.0feet (3,6Meter)
Keonn RFID Reader to Antenna RF Cables - SMA male straight - Rev TNC male straight - 17.0feet (5,2Meter)
Keonn RFID Reader to Antenna RF Cables - SMA male straight - Rev TNC male straight - 25.0feet (7,5Meter), LMR240
Specifications:Temperature range-20°C to +55°C
Operating Frequency 813 - 1000 MHz (Broadband for different regions)
Operating Detection distance Up to 1 m (Using far-field tags)
Radiation pattern Wide beam in both directions
Max Far-Field Gain 2.0 dBi
Beam width 100° / 100°
Input Impedance 50 Ω (May be affected by the presence of metal at distances closer than 15 cm)
Connector SMA
Flange straight or flange right angle
IP rating: IP65, IP68: Dust resistant, even in high concentration // Resistant to normal water jets for at least 3 minutes // Immersion resistant (up to 1m for up to 30 minutes)
Size excluding connector 137mm x 137mm x 0.5mm (5.4 inches x 5.4 inches x 0.02 inches)
Size with flange connector 137mm x 137mm x 13mm (5.4 inches x 5.4 inches x 0.5 inches)
Antenna weight 25g